Prepare the bath
For a tank containing 10 litres of final solution, this corresponds to approximately 0.5 litres of product topped up with water.
TENDER STARMADE IN BELGIUM Back to equipmentPRODUCT FOR
Professional parts maintenance
PRODUCT FOR
CLEANING
A professional formula designed for thorough cleaning of Tender Star blade blocks and removable parts. It can be used by soaking or in an ultrasonic bath to reach hard-to-access areas.
Degreases and removes protein residues For compatible stainless steel and POM For professional use only
5 LPack size
5 %Indicative concentration
60 °CIdeal temperature
4–30 minDepending on soiling
Complementary action
Bath chemistry and cavitation work together.
The product acts on fats, oils, blood and protein residues. The microbubbles created by ultrasound carry this action around the part, between blades and into contours that are difficult to brush directly.
Ultrasonic cleaning does not replace the hygiene procedure: after the cycle, parts must be thoroughly rinsed, dried and then disinfected when required by your protocol.
- Blood and protein residues
- Fats and oils
- Bone and albumin residues
- Hard-to-reach gaps
Indicative settings
Adapt the duration to the condition of the parts.
Start with a bath at a concentration of 5 %. The concentration can be increased for more stubborn soiling, in accordance with the safety data sheet.
Select the temperature
The specified operating range is 20 to 70 °C. The recommended cycle temperature is ideally 60 °C.
Moderate soiling
A short cycle is generally sufficient when parts are maintained regularly.
Heavy soiling
Extend the cycle without exceeding 30 minutes for thorough cleaning.
REAR VIEW · FULL LABELLINGRecommended procedure
Prepare, treat, rinse.
- 1
Fill before connecting powerClose the drain, fill the tank and maintain the minimum level specified in the operating instructions.
- 2
Dose and arrangeAdd the product, then place the parts spaced apart in the basket without stacking them.
- 3
Start the cycleSet the temperature, duration and programme to suit the level of soiling.
- 4
Rinse completelyRemove the parts using suitable protection, rinse them under running water and then dry them.
Product label information
A professional product to handle with care.
Tender Star Machine Cleaner is a concentrated product. Consult its label and safety data sheet before preparing the bath.
May be corrosive to metals and cause severe skin burns and serious eye damage.
Wear chemical-resistant gloves, eye protection and suitable clothing during handling.
After treatment, rinse the blade block completely with water or run a suitable dishwasher cycle.
Documentation
The detailed method, to keep in the workshop.
The document explains the product’s role, its use for soaking and the requirement to rinse blade blocks thoroughly after treatment.
BROCHURE · FR · TWO SIDESTender Star Machine CleanerAction, method, parameters and precautions
FRPROFESSIONAL OPERATING INSTRUCTIONS · 8 PAGES · FR / NL / ENTender Star Machine CleanerContents, settings, procedures, safety and workshop reference sheet
FR · NL · ENSAFETY DATA SHEET · FRTender Star Machine CleanerVersion 1.2 · Revised 14/06/2017
FRYour cleaning procedure
Need to confirm the product or concentration ?
Tell us which parts you need to clean, their material and your current method. We will help you choose the appropriate cycle and precautions.
Request advice