Load
Place the cuts on the shelf and infeed belt.
TENDER STARMADE IN BELGIUMAutomatic conveyor meat tenderiser
A continuous solution for tenderising large volumes quickly, with consistent feed and an even result.
The TSAB is an automatic conveyor belt meat tenderiser, designed and manufactured by Tender Star in Belgium for continuous meat processing. This industrial meat tenderizer treats successive portions with a blade block.

Continuous production
The operator places fresh or thawed, boneless meat on the belt. The angled guides centre it within the working width, then the blade block tenderises it. The meat is collected on the other side of the machine.
Place the cuts on the shelf and infeed belt.
The angled guides keep cuts within the 330 mm working area.
The 784-blade block tenderises the meat as it moves along the conveyor.
Tenderised meat emerges automatically at the other end.
FROM INFEED TO OUTFEEDAdjustable feed
The control lever selects a feed increment of 80, 40 or 20 mm without stopping the machine. Shorter increments bring the blade impacts closer together. The operator chooses the setting to suit the product’s firmness and the desired result.
≈ 6 500 kg/hIndicative capacity
≈ 3 300 kg/hIndicative capacity
≈ 1 500 kg/hIndicative capacity
Calculation assumptions: 60 cycles per minute, average density of 1 kg/litre and estimated effective use of 50 % of the available volume. Actual throughput varies according to product shape, thickness, arrangement and consistency of feeding.
Direct controls
The green indicator lamp shows that the machine is powered and ready to operate.
The control buttons start or stop operation.
The red mushroom-head emergency stop button stops the machine immediately when needed.

OPEN ACCESS FOR CLEANINGHygiene & accessibility
Once the TSAB has stopped and its power has been disconnected, the two side doors and the rear door on the outfeed side can be opened. The operator then has direct access to the belt, product path and internal parts requiring cleaning.
They open up both sides of the machine for easy access to internal components.
The door on the outfeed side opens to allow removal of the blade block, spacer and meat stripper plate. This provides unrestricted access to the area and simplifies cleaning.
Located beneath the conveyor belt, the three support boards can be removed easily, one at a time and without tools, for separate cleaning. They are not numbered and can be reinstalled in any order or orientation.
Parts in contact with meat are designed for rapid tool-free disassembly, cleaning and reassembly.
The heart of the TSAB
The 400 mm belt guides cuts into the 330 mm effective tenderising width. The 784 stainless steel blades can be removed individually. Their 2 mm round bodies end, in the standard configuration, in a flattened 3 mm cutting edge.

The polyethylene spacer first guides each blade in one direction. The stainless steel spacer then stabilises it in all directions. This double support limits bending and helps the blades penetrate the meat along as straight a path as possible.
Blade geometry
If the blades were aligned with the direction of feed, they would repeatedly work the same lines. Their diagonal arrangement offsets new impacts as the conveyor moves and distributes tenderising across the whole surface.
Because impacts are more evenly distributed, less repeated treatment is needed to achieve the desired result. Production moves faster and the risk of damaging cuts is reduced.
Choice of cutting edge
Only the cutting tip changes. The blade body and length remain identical.
The configuration supplied as standard with the TSAB for everyday tenderising.

A finer cut, valued for certain delicate products. The 2 mm blades and their dedicated blade block are available as options.

TSAB on video
This video shows meat moving continuously along the belt and the blade block operating automatically.
The YouTube video is only loaded with your consent.
The YouTube video is only loaded with your consent.
Technical data
Specifications taken from the supplied brochure and operating instructions.
The machine in detail





Technical documentation is reserved for approved dealers and authorised customers. Request access →
TSAB documentation
Find the sales presentation and complete instructions for safety, operation and maintenance.
Operation, hygiene, speed, safety and technical data.
Installation, controls, tenderising, disassembly, cleaning and safety.
Let’s discuss your production