Back to the range

Professional meat mincer

TSH 52

A robust production mincer with every detail designed to combine capacity, hygiene and ease of maintenance.

The TSH 52 professional meat mincer, also known as a meat grinder, is designed for meat processing with practical access for daily cleaning and maintenance.

± 1 500 kg/h with 3 mm plate Mincing components in 316L stainless steel CE requirements · safety & hygiene
Tender Star TSH 52 professional meat mincer with background fully removed
52Enterprise system
90 LStandard hopper
7.5 kWMotor power
316LHead, auger and ring

Durable construction

Stainless steel in every detail.

The hopper, frame, body and machine interior are made from stainless steel. Components that face the greatest exposure to the product and repeated cleaning use an even more corrosion-resistant grade.

Top view of the TSH 52 showing the hopper interior, rounded edges and protective grid
316L STAINLESS STEEL

Enhanced resistance for critical components

The head, auger and tightening ring are made from 316L stainless steel, a grade also used in medical applications. Its corrosion resistance is particularly suited to repeated cleaning and damp environments.

Generously rounded internal corners of the TSH 52 hopper
01

Hopper with rounded internal corners

The hopper’s generously rounded internal corners make cleaning easier.

Hopper safety guard made from 30 mm solid bar on the TSH 52
02

Ø 30 mm solid-bar guard

The safety guard is made from 30 mm solid bar for robust protection.

Daily cleaning

Clear access to every surface that needs cleaning.

  1. 01

    Disconnect and disassemble

    Remove the ring, plate, knife and auger using the specified extraction key.

  2. 02

    Lift, open and brush

    Lift the lever to unlock the head, pivot it, then brush every surface with a suitable detergent.

  3. 03

    Rinse and disinfect

    Follow your site’s hygiene procedure for all parts.

  4. 04

    Inspect and dry

    Check the flights, grooves and threads before drying completely.

A Tender Star feature

The head opens like a door.

After disconnecting the machine and removing the cutting components, the head pivots to give full access to the inside of the body. It can also be removed completely. The operator can see the surfaces to clean and can brush, rinse, disinfect and dry them without working blind.

  • Direct access to the body and food-contact surfaces
  • Removable auger, knife, plate and ring
  • Easy visual inspection before reassembly
TSH 52 mincer head closed and locked in working position
01 · Head lockedThe head is held in working position.
Operator’s hand lifting the TSH 52 locking lever
02 · Lift the leverOne action is enough to release the head.
TSH 52 mincer head opened sideways like a door
03 · Open the headIt pivots on its hinge, opening up the body completely.

After washing

A groove to drain water.

A drainage channel inside the body helps rinse water drain away from the flights rather than collect there. It does not change how the mincer operates: it improves drainage and helps the parts dry completely after cleaning.

Drainage grooves visible inside the TSH 52 mincer body
Replaceable locating insert on the left-hand side of the TSH 52 mincer body opening
Replaceable locating insert

Practical maintenance

Replace the small part, not the entire head.

The locating insert inside the head can be removed with an Allen key. When worn, it can be replaced quickly with an original part without replacing the entire mincing body.

TSH 52 on video

Discover the mincer and its disassembly.

Two short videos showing the machine and how to access its removable parts.

Tender Star TSH 52 mincer — Presentation

The YouTube video is only loaded with your consent.

OVERVIEW

TSH 52 in operation

View on YouTube
Tender Star TSH 52 mincer — Disassembly

The YouTube video is only loaded with your consent.

DISASSEMBLY

Access removable parts

View on YouTube

Technical data

TSH 52

The nameplate data and supplied configuration take precedence.

Cutting system
Enterprise 52
Perforated plate
Ø 130 mm
Standard hopper
90 litres
Throughput with 3 mm plate
± 1 500 kg/h
Motor power
7.5 kW
Electrical supply
400 / 240 V three-phase
Dimensions W × D × H
620 × 1 160 × 1 540 mm
Overall length with head
1 420 mm
Net weight
258 kg
Noise level
69.7 dB(A)

Technical documentation is reserved for approved dealers and authorised customers. Request access →

Documentation

Three documents, three uses.

A product brochure, complete operating instructions and a separate parts list for technicians.

Your production

Is the TSH 52 suitable for your workshop?

Tell us about your products, required mince size, output and electrical supply. We will help you confirm the appropriate configuration.

Request advice