Back to the range

Electric meat tenderiser

TSEElectric blade meat tenderiser

High throughput and a large working area for fast, even tenderising with minimal visible marks on the meat.

The TSE is a professional electric blade meat tenderiser, designed and manufactured by Tender Star in Belgium for butchers and meat processing businesses looking to mechanise their meat tenderizing process.

Patented disassembly system Professional stainless steel construction CE requirements · safety & hygiene
Tender Star TSE electric tenderiser
150 to 500 kg/hIndicative theoretical capacity
574Stainless steel blades
± 60 cycles/minOperating rate
140 mmMaximum thickness

Designed for high throughput

Fast, consistent and controlled tenderising.

The TSE combines an electric drive with a 574-blade block. Its wide board makes large cuts easier to process while keeping handling simple for the operator.

01

Hygiene

Parts in contact with meat can be disassembled, washed and sterilised.

02

Speed

Approximately 60 cycles per minute and an indicative capacity of up to 500 kg/h.

03

Maintenance

The blade block, meat stripper plate and board can be removed quickly without tools.

04

Safety

Built-in safety systems prevent operation unless the required safety conditions are met.

Blade block and working area of the TSE tenderiserDirect access to the working area

Productivity & comfort

A large working area for large cuts.

The 50 × 40 cm tenderising surface and clearance of up to 140 mm allow large cuts to be processed. The TSE can also operate in a refrigerated environment.

50 × 40 cmTenderising surface
90 × 42 cmSafety board
0.9 kWElectric drive
180 kgProfessional stability

The heart of the TSE

574 blades to distribute incisions precisely.

Each stainless steel blade has a 2 mm round body. The standard version ends in a flattened 3 mm cutting edge. A blade block with 2 mm cutting edges is also available as an option for certain more delicate products.

Technical view of the TSE’s 574-blade block, arranged diagonally
BLADE BLOCK VIEW

574 blades arranged diagonally.

This arrangement offsets impact points as the board moves. The meat is tenderised more evenly, with fewer strokes and less risk of damage.

574Individually removable stainless steel blades
Ø 2 mmRound body shared by both versions
SharpenedTo penetrate the toughest cuts of meat
Tool-freeQuick blade block removal
A DISTINCTIVE TSE FEATURE

A dual-spacer system to keep the blades straight.

The polyethylene spacer first guides each blade in one direction. The stainless steel spacer then stabilises it in all directions. This double support limits bending and helps the blades penetrate the meat along as straight a path as possible.

Exclusive geometry

Why are the TSE blades arranged diagonally?

When the board moves forwards or backwards, aligned blades would always strike the same lines: some strips of meat would never be touched. On the TSE, the blades are arranged diagonally. With each advance, new impacts fall between the previous ones. The whole surface is therefore tenderised more evenly.

Comparison of blade impact distributionOn the left, aligned impacts leave untenderised strips. On the right, the diagonal arrangement of TSE blades offsets impacts when the board moves forwards or backwards, covering the meat more evenly.IF THE BLADES WERE ALIGNEDAlways the same linesUNTENDERISED STRIPSON THE TSE · DIAGONAL BLADESNew impacts fill the gapsMORE EVEN COVERAGE
Aligned impacts: untreated areas Offset impacts: even distribution
WITHOUT OFFSET

The blades strike the same lines again.

Between these lines, some of the meat remains barely tenderised or untreated.

THE TSE PRINCIPLE

New impacts fall between previous ones.

The meat is worked more evenly, leaving far fewer untouched areas.

Fewer strokes, a more even result

Because impacts are better distributed throughout the meat, fewer strokes are needed to achieve the desired result. Work is therefore faster, tenderising is more even and the risk of damaging the meat is reduced further.

Choice of cutting edge

The same 2 mm body, two cutting widths.

Only the cutting tip changes. The blade body and length remain identical.

STANDARD · REF. TSE.223

3 mm cutting edge

The configuration supplied as standard with the TSE for everyday tenderising.

Tender Star technical drawing of the 2 mm blade body and standard 3 mm cutting edge
Blade bodyØ 2 mmCutting edge3 mm
OPTION · REF. TSE.222

2 mm cutting edge

A finer cut, valued for certain delicate products. The 2 mm blades and their dedicated blade block are available as options.

Tender Star technical drawing of the 2 mm blade body and optional 2 mm cutting edge
Blade bodyØ 2 mmCutting edge2 mm

TSE videos

Discover the machine and its blade block.

An overview of the TSE, a blade block demonstration and guidance on safe handling practices and common mistakes to avoid.

Presentation of the Tender Star TSE electric tenderiser

The YouTube video is only loaded with your consent.

OVERVIEW

TSE in operation

View on YouTube
Disassembly and reassembly of the Tender Star TSE blade block

The YouTube video is only loaded with your consent.

MAINTENANCE

Blade block disassembly and reassembly

View on YouTube
Recommended practices for assembling and disassembling the Tender Star TSE blade block

The YouTube video is only loaded with your consent.

HANDLING GUIDANCE

What to do and what to avoid

View on YouTube

Use

A simple cycle for controlled results.

  1. 1

    PositionPull the board towards you and place the meat on it.

  2. 2

    InsertPush the board back under the blade block.

  3. 3

    TenderisePress down on the cover until the desired level of tenderising is achieved.

TSE footprint

Essential dimensions at a glance.

The left, front, rear and top views show the machine’s actual geometry and the dimensions needed to plan its installation.

Dimensioned TSE technical drawing with left, front, rear and top views
1 800 mmOverall height
600 mmMachine width
850 mmBase width
951 mmWorking height
900 mmBoard length
1 026 to 1 200 mmDepth depending on position

Technical drawing dimensioned in millimetres · Allow the clearances needed for use, cleaning and maintenance.

Technical data

A machine sized for production.

The main TSE specifications, from the supplied technical brochure.

Height × width × depth180 × 60 × 102.6 to 120 cm
Base width85 cm
Working height95.1 cm
Weight180 kg
Safety board90 × 42 × 2.6 cm
Tenderising surface50 × 40 cm
Maximum cut thickness140 mm
Number of blades574 stainless steel blades
Operating rateApproximately 60 cycles/min
Indicative theoretical capacity150 to 500 kg/h
Motor0.9 kW · 220/380 V · 50/60 Hz
ConstructionStainless steel
CleaningSuitable for high-pressure cleaning

Your production

Is the TSE right for your production needs?

The TSE is designed for professionals seeking a significantly higher operating rate than a manual tenderiser, while retaining control over meat positioning and the number of passes.

INDICATIVE THEORETICAL CAPACITY150 to 500 kg/h

A realistic estimate for an organised workstation with one operator. Output varies with cut shape and weight, the desired number of passes and handling pace.

± 60cycles per minute
50 × 40 cmusable surface
140 mmmaximum thickness
01

Butchers’ shops and meat preparation facilities

Process regular batches of cuts while adjusting the tenderising precisely to suit each product.

02

Supermarkets and cutting rooms

For consistent results at sustained volumes, including large cuts.

03

Caterers and production kitchens

For efficient preparation of tender or marinated meats when a steady operating rate is needed.

THE TSE IS PARTICULARLY SUITABLE IF…
  • you process regular or sustained volumes;
  • you want to control the number and position of passes;
  • you work with cuts up to 140 mm thick;
  • you seek a robust machine that can be disassembled and is suited to professional cleaning.

Let’s discuss your production requirements.

Tell us about your business, products, required hourly output and electrical supply. We will confirm whether the TSE is the most suitable solution.

Request a TSE assessment

For a continuous process and industrial volumes, the TSAB automatic conveyor tenderiser may be more appropriate.

Technical documentation is reserved for approved dealers and authorised customers. Request access →

TSE documentation

Documents to view or download.

Sales brochure in French and complete TSE operating instructions in English.

BROCHURE · EN

TSE electric meat tenderiser

Hygiene, maintenance, speed, safety, blades, use and technical data.

Download EN
OPERATING INSTRUCTIONS · EN · 34 PAGES

TSE operation and maintenance

Installation, safety, tenderising, disassembly, reassembly, maintenance, electrical diagram, spare parts and parts lists.

Download EN

Let’s discuss your production

Can the TSE meet your production requirements?

Request a TSE quotation